How do you fold a Quinny Moodd?
Firstly, lay the chassis flat on the chassis. This will ensure that the canopy is fully extended.
If possible, make sure to thread the canopy through the hole in the chassis to allow it to unfold.
Also, make sure to thread the canopy through the hole in the chassis to allow it to unfold.
To fold the canopy, insert the hood and click the lever between the 2 rear wheels at the same time.
If the button on the side of the canopy is moved incorrectly, the canopy will fold right down. I would suggest putting the button where you assembly the canopy first so that the canopy doesn’t unfold first.
To fold the canopy zipper, remove the hood and click the lever between the 2 rear wheels at the same time. I would suggest doing this at the same time as removing the hood and clicking it.
To fold the raincover, remove the hood and click the lever between the 2 rear wheels at the same time. I would suggest doing this at the same time as removing the hood and clicking the lever. Fold the car seat cover out over the rear wheel. This will clip into the tab under the seat. If necessary, fold the seat unit in two and attach the raincover under the seat. I highly suggest doing this as it can be very useful if you need to unfold the frame a little bit to provide a more firm canopy.
I generally keep the Maxi-Cosi recline for raising the rear wheel in the car seat unit in place so that it can recline when the seat is in place. When the recline is in place, the car seat is reclined in that position for the majority of the test period. The car seat did get a little dirty about about an hour after I first put it in the boot of my car, so I tend to keep it in its original place. The car seat was very easy to push up in this mode and I could see the marks between the car seat and the road maybe a little bit. It’s a very handy feature to have when selling used cars and I would be9
leaner in the boot of the car if I was buying a new car.
Was this helpful